Annotation, Block And Layers

DIMENSIONS

Using this command you can show different type type of dimension to drawing.
Through dimension you can show your drawing by its absolute  parameters.
Different type dimension are as-

Linear
Aligned
Radius
Diameter
Multi-leader
Baseline
Continuous

Dimension

TABLE 

Using this command in Autocad you can create table by specified number of column and rows, row width and column height.

   -  Select command
   -  Specify number of columns, rows, row width, column height
   -  Click on ok
   -  Click on screen where want to place the table

Table

MULTI-LINE TEXT

Using this command you can write a text anywhere.

   -  Select command
   -  Click on first point from where you have to start text
   -  And then, click on the end point of text
   -  Now, write the text
   -  Click anywhere on the screen

TO CHANGE THE STYLE OF TEXT

   -  Go to format > text style
   -  Select text style
   -  Specify height of the text, oblique angle due to which every word rotates at that specified angle
   -  Click on ok

Multi-line Text

Read More

Auto-cad command and Shortcut Keys

S.NO	COMMANDS				SHORTCUT KEYS
1.	GRID				F7
2.	ORTHO				F8
3.	DYNAMIC INPUT				F12
4.	OBJECT SNAP				F3
5.	ZOOM				Z
6.	LINE				L
7.	POLYLINE				PLINE
8.	CIRCLE				C
9.	RECTANGLE				REC
10.	OFFSET				O
11.	TRIM				TR
12.	EXTEND				EX
13.	ERASE				E
14.	SPLINE				SPL
15.	EXPLODE				X
16.	COPY				CO
17.	MOVE				M
18.	MIRROR				MI
19.	ROTATE				RO
20.	SCALE				SC
21.	STRETCH				ST
22.	MULTILINE				MLINE
23.	POLYGON				POL
24.	TABLE				TAB
25.	HATCH				H
26.	GRADIENT				GRA,GD
27.	POINT				PO
28.	BOUNDRY				BO
29.	REGION				REG
30.	ARC				A
31.	ELLIPSE				EL
32.	DONUT				DO
33.	ARRAY				AR
34.	LENGTHEN				LEN
35.	INSERT BLOCK				B
36.	TEXT				T
37.	FILLET				F
38.	CHAMFER				CHA
39.	BREAK				BR
40.	JOIN				J
41.	DESIGN CENTER				DC
42.	LINETYPE				LT
43.	LAYERS				LA
44.	DIMENSION				DIM
45.	MULTILEADER				MLEADER
46.	DIMENSIONSTYLE				DS
47.	EXTRUDE				EXT
48.	ORBIT				OR
49.	SUBSTRACT				SUB
50.	UNION				UN
51.	INTERSECT				IN
52.	RENDER				REN
53.	REVOLVE				REV
54.	SWEEP				SW
55.	CAMERA				CAM
56.	SLICE				SL
57.	SECTION				SEC
58.	HYPERLINK				HY
59.	PLOT				PLO
60.	LINEWEIGHT				LW
61.	PROPERTIES				CHA

Read More

MODIFY TOOLS IN AUTO-CAD

             
                                                              
ERASE 
Using this command in Auto-cad  you can remove a line.

   -  Select command
   -  Select line segments to remove
   -  Enter

Erase

COPY 
using this command you can create multiple object same as original object from single object.

   -  Select command
   -  Select object to copy
   -  Enter
   -  Specify base point to object
   -  Then, either click where you want to copy or specify length and angle to copy the object.

COPY

Read More

Line & polyline in Autocad

Read More

Drawing Tools in Autocad

 LINE
Using this command in Auto-cad you can create a straight line at different angle. ALL lines are disconnected to each other witch can be erase separately.
 
   -select command
   -Click on first point of line from where you have to start line.
   -move the mouse in that direction in which you have to draw line.
   -specify length.
   -enter

 LINE COMMAND 

LINE TYPE
Using this command you can convert a line into center-line , hidden line etc.
   -  Click on line type bar
   -  Click on other
   -  Select load tab
   -  Select line that you have to show
   -  Click on ok
   -  Again click on ok tab from line type
   -  Now, select the line that has to change and click on line type from line type bar

LINE WEIGHT
Using this command you can change the width of a line by chose any one of width from line weight bar

By default the line weight is not shown, so go to line weight setting and turned on display line weight

LINE COLOR
Using this in Auto-cad command you can change the color of line

   -  Select line whose color has to be change
   -  Then, click on line color and choose the color

                                                   https://youtu.be/gozjwIdKyE0

POLY-LINE Using this command you can create a 2D poly-line which are connected sequence of line segments,arc segments or a combination of the two.
   -Select command
   -Click on first point of line from where you  have to start line.
   -Move the mouse in that direction in which you have to draw line.
   -Specify length.
   -Enter
   -To draw arc press A
   -And then, specify radius or length of the arc
   -Enter

Poly-line Detail

CONSTRUCTION LINE

 Using this command you can draw a line of infinite length.This command is used as axis line .

Construction Line

MULTI LINE

 Using this command you can draw two or more line together.

 You can change the distance between them from FORMAT MENU> MULTI LINE STYLE 

MULTI LINE

CIRCLE
Using this command you can create different type of circles.
1.

Read More

Autocad Definition

It is the Automatic computer Aided design/Drawing/Drafting in which we come to know various aspects of designing performed by computer.

AutoCAD is a basic and first software which is used in designing in different field as mechanical,electrical,civil,interior designing,fashion designing,architectural.

Autocad is a user Friendly software that means there is a command bar which is shown to thw bottom of the screen in which the next step of any command are shown.This software can be totally carried through shortcut keys.

Read More